Verfasste Forenbeiträge
-
AutorBeiträge
-
wvantoornTeilnehmer
Entschuldige mein deutsch, komme aus holland und sehr lange her das ich deutsch schreiben musste.
Hab jetzt mein SC xl soweit hin das alles functioniert, bis auf die hotend, Die kommt von mendelmax 1.5 wenn die SC fertig ist.
Hab das MABL jetzt fertig, und sieht gut aus. Hatte noch kleine fehler aber das waren die kabel die falsch rein gesteckt waren.
Will nur noch die Z hohe andern auf 160 weil ich will im zukunft das MABL von glatzeman aufbauen. aber denke das ist ein eeprom problem.Hier hab ich die daten von die letzte autoleveling mit die ind. sensor. (hab auch die radds,raps128, LCD.)
22:18:19.778 : start
22:18:19.778 : Info:PowerUp
22:18:19.778 : Transformation matrix: 1.000000 0.000000 0.000000 0.000000 1.000000 0.000000 0.000000 0.000000 1.000000
22:18:22.448 : Free RAM:77028
22:18:22.448 : SelectExtruder:0
22:18:22.463 : FIRMWARE_NAME:Repetier_0.92.9 FIRMWARE_URL:https://github.com/repetier/Repetier-Firmware/ PROTOCOL_VERSION:1.0 MACHINE_TYPE:Core_XY EXTRUDER_COUNT:1 REPETIER_PROTOCOL:3
22:18:22.463 : Printed filament:96.64m Printing time:3 days 6 hours 53 min
22:18:22.463 : PrinterMode:FFF
22:18:22.479 : X:0.00 Y:0.00 Z:0.000 E:0.0000
22:18:22.479 : DebugLevel:6
22:18:22.479 : SelectExtruder:0
22:18:22.479 : Begin file list
22:18:22.479 : End file list
22:18:22.494 : DebugLevel:6
22:18:22.494 : SelectExtruder:0
22:18:37.156 : X:300.00 Y:0.00 Z:0.000 E:0.0000
22:18:44.802 : X:300.00 Y:300.00 Z:0.000 E:0.0000
22:22:36.209 : X:60.00 Y:300.00 Z:190.000 E:0.0000
22:26:39.693 : Transformation matrix: 1.000000 0.000000 0.000000 0.000000 1.000000 0.000000 0.000000 0.000000 1.000000
22:26:39.693 : SelectExtruder:0
22:26:47.762 : X:300.00 Y:300.00 Z:190.000 E:0.0000
22:28:22.401 : Z-probe:7.51 X:60.00 Y:60.00
22:28:30.038 : Z-probe:8.11 X:240.00 Y:60.00
22:28:38.409 : Z-probe:8.56 X:60.00 Y:240.00
22:28:41.717 : plane: a = 0.0033 b = 0.0058 c = 6.9645
22:28:44.086 : CurrentZ:8.70 atZ:10.00
22:28:44.089 : Z after rotation:10.00
22:28:44.089 : Printer height:188.70
22:28:50.036 : Z-probe:10.57 X:60.00 Y:60.00
22:29:00.329 : Z-probe:10.68 X:240.00 Y:60.00
22:29:11.287 : Z-probe:10.68 X:60.00 Y:240.00
22:29:15.641 : plane: a = 0.0006 b = 0.0006 c = 10.4992
22:29:15.973 : CurrentZ:10.69 atZ:10.00
22:29:15.973 : Z after rotation:10.00
22:29:15.973 : Printer height:189.39
22:29:21.717 : Z-probe:10.09 X:60.00 Y:60.00
22:29:31.577 : Z-probe:10.09 X:240.00 Y:60.00
22:29:41.888 : Z-probe:10.09 X:60.00 Y:240.00
22:29:45.945 : plane: a = 0.0000 b = 0.0000 c = 10.0875
22:29:45.945 : CurrentZ:10.09 atZ:10.00
22:29:45.967 : Z after rotation:10.00
22:29:45.967 : Printer height:189.48
22:31:23.017 : X:300.00 Y:300.00 Z:189.479 E:0.0000
22:31:23.117 : X:300.00 Y:300.00 Z:189.479 E:0.0000Attachments:
wvantoornTeilnehmerMit der online firmware configuration tool kannst du die configuration.h von dropbox runterladen, und dan controlieren. die firmware als zip downloaden, und mit arduino ide gleich wie marlin hochladen auf die ramps.
Und das geht sehr gut. hab ein sparkcube 1.1 mit ramps und lauft sehr gut. hab auch ne sparkcube 1.1XL und die ist mit radds 1.5 auch super.
Du brauchst kein angst fur die thermistors zu haben, und probier es, geht es nicht, werden wir dir weiter hilfen.
-
AutorBeiträge