#1716
Qowaz
Teilnehmer

Ok. Komplette FW mit der v1.0.0dev erstellt und aufgespielt. Hat auch funktioniert, er führt MABL in einen anderen Ablauf aus .
Zuletzt fuhr erst das Bett hoch und dann liefen XY in Position, jetzt fährt zuerst XY in Position und dann das Bett.
Aber mein Problem bleibt, ich möchte ihn justieren, gehe nach Deinem Fahrplan vor, Vincent, Sensor runter, Z-Probe Height 0, Probe Bed Distance 40, Bett grob manuell ausrichten, G28, G32 S2 und er regelt in die falsche Richtung so das der Arsch hoch kommt. Siehe LOG. Das schlimme ist, das Bett passt beim ersten Versuch IMMER fast, wie man sieht. Jedenfalls komme ich nicht weiter. Was mache ich falsch? Ich muss doch auch mal drucken… 😉

23:55:27.637 : start
23:55:27.637 : Info:PowerUp
23:55:27.637 : Detected EEPROM version:18
23:55:27.637 : Transformation matrix: 1.000000 0.000000 0.000000 0.000000 1.000000 0.000000 0.000000 0.000000 1.000000
23:55:27.802 : N1 M110*34
23:55:27.802 : N2 M115*36
23:55:27.802 : N4 M114*35
23:55:27.802 : N5 M111 S6*98
23:55:27.828 : N6 T0*60
23:55:27.828 : N7 M20*22
23:55:27.835 : N8 M80*19
23:55:28.850 : Free RAM:76760
23:55:28.850 : SelectExtruder:0
23:55:28.877 : N10 M220 S100*80
23:55:28.877 : N11 M221 S100*80
23:55:28.877 : N12 M111 S6*84
23:55:28.877 : FIRMWARE_NAME:Repetier_1.0.0dev FIRMWARE_URL:https://github.com/repetier/Repetier-Firmware/ PROTOCOL_VERSION:1.0 MACHINE_TYPE:Core_XY EXTRUDER_COUNT:1 REPETIER_PROTOCOL:3
23:55:28.878 : N13 T0*8
23:55:28.878 : Cap:PROGRESS:1
23:55:28.878 : Cap:AUTOREPORT_TEMP:1
23:55:28.878 : Cap:EEPROM:1
23:55:28.878 : Cap:AUTOLEVEL:1
23:55:28.878 : Cap:Z_PROBE:1
23:55:28.879 : Cap:SOFTWARE_POWER:0
23:55:28.879 : Cap:TOGGLE_LIGHTS:0
23:55:28.879 : Cap:PAUSESTOP:1
23:55:28.883 : Cap:PREHEAT:1
23:55:28.887 : Printed filament:0.20m Printing time:0 days 0 hours 15 min
23:55:28.887 : PrinterMode:FFF
23:55:28.975 : X:0.00 Y:0.00 Z:0.000 E:0.0000
23:55:28.975 : DebugLevel:6
23:55:28.975 : SelectExtruder:0
23:55:28.976 : Begin file list
23:55:28.979 : End file list
23:55:28.980 : DebugLevel:6
23:55:28.980 : SelectExtruder:0
23:55:33.041 : N15 G28*39
23:56:17.375 : X:300.00 Y:300.00 Z:265.702 E:0.0000
23:56:28.703 : N34 G32 S2*110
23:57:34.605 : Z-probe:41.575 X:60.00 Y:60.00
23:58:01.107 : Z-probe:41.914 X:240.00 Y:60.00
23:58:27.215 : Z-probe:41.026 X:120.00 Y:260.00
23:58:27.219 : plane: a = 0.0019 b = -0.0033 c = 41.6615
23:58:28.444 : Printer height:267.26
23:58:28.449 : CurrentZ:41.66 atZ:40.10
23:58:54.753 : Z-probe:41.142 X:60.00 Y:60.00
23:59:20.791 : Z-probe:41.117 X:240.00 Y:60.00
23:59:46.232 : buy:processing
23:59:46.338 : Z-probe:39.826 X:120.00 Y:260.00
23:59:46.342 : plane: a = -0.0001 b = -0.0065 c = 41.5421
23:59:48.764 : Printer height:268.71
23:59:48.768 : CurrentZ:41.54 atZ:40.10
00:00:15.359 : Z-probe:41.633 X:60.00 Y:60.00
00:00:41.697 : Z-probe:41.634 X:240.00 Y:60.00
00:01:06.813 : Z-probe:39.076 X:120.00 Y:260.00
00:01:06.817 : plane: a = 0.0000 b = -0.0128 c = 42.4004
00:01:11.560 : Printer height:271.01
00:01:11.564 : CurrentZ:42.40 atZ:40.10
00:01:13.436 : Printer reset detected – initalizing
00:01:13.436 : start
00:01:13.436 : Info:PowerUp
00:01:13.441 : Detected EEPROM version:18
00:01:13.455 : Transformation matrix: 1.000000 0.000000 0.000000 0.000000 1.000000 0.000000 0.000000 0.000000 1.000000
00:01:13.611 : N1 M110*34
00:01:13.611 : N2 M115*36
00:01:13.611 : N4 M114*35
00:01:13.613 : N5 M111 S6*98
00:01:13.616 : N6 T0*60
00:01:13.616 : N7 M20*22
00:01:13.619 : N8 M80*19
00:01:14.706 : Free RAM:76760
00:01:14.706 : SelectExtruder:0
00:01:14.727 : FIRMWARE_NAME:Repetier_1.0.0dev FIRMWARE_URL:https://github.com/repetier/Repetier-Firmware/ PROTOCOL_VERSION:1.0 MACHINE_TYPE:Core_XY EXTRUDER_COUNT:1 REPETIER_PROTOCOL:3
00:01:14.727 : Cap:PROGRESS:1
00:01:14.727 : N9 M220 S100*104
00:01:14.727 : N10 M221 S100*81
00:01:14.727 : N11 M111 S6*87
00:01:14.728 : N12 T0*9
00:01:14.731 : Cap:AUTOREPORT_TEMP:1
00:01:14.731 : Cap:EEPROM:1
00:01:14.735 : Cap:AUTOLEVEL:1
00:01:14.735 : Cap:Z_PROBE:1
00:01:14.735 : Cap:SOFTWARE_POWER:0
00:01:14.739 : Cap:TOGGLE_LIGHTS:0
00:01:14.739 : Cap:PAUSESTOP:1
00:01:14.739 : Cap:PREHEAT:1
00:01:14.747 : Printed filament:0.20m Printing time:0 days 0 hours 15 min
00:01:14.747 : PrinterMode:FFF
00:01:14.755 : X:0.00 Y:0.00 Z:0.000 E:0.0000
00:01:14.755 : DebugLevel:6
00:01:14.755 : SelectExtruder:0
00:01:14.763 : Begin file list
00:01:14.764 : End file list
00:01:14.768 : DebugLevel:6
00:01:14.772 : SelectExtruder:0

  • Diese Antwort wurde geändert vor 7 Jahren von Qowaz.
Attachments: